HOME Home  | Shop at Store E-Store  | Phone Phone  
RTP logo

CSS Menu Generator Download Css3Menu.com





WHat bracket do I need?

Do you have 4-COrner MECHANICAL, Hydraulic or Electric Jacks? Look below FOR INFORMATION if you do.

Hi Strength Extended Bracket Swing Away Hi STrength Double Extended Bracket 2 piece 13 inch HD Wide Bracket
EZ SWING
10153
Swing Away
RSB-2A
RSB-2z
Swing away
Extension Plate
15065
2 -Piece 13 " Heavy Duty WIDE BRACKET
90713

EZ Swing Bracket bolts onto existing corner bracket, allows camper jacks to ride inboard for traveling, swings out for unloading and adds 4 5/8 inch clearance per side for wide fender and dual wheels. For use with Rieco-Titan and Atwood 4-Corner Mechanical, Hydraulic and Electric jacks. It comes in arctic white paint.

Click here to choose your correct swing bracket

Swing-a-way Bracket bolts onto existing corner bracket, allows camper jacks to ride inboard for traveling, swings out for unloading and adds 4 inch clearance per side for wide fender and dual wheels. For use with Rieco-Titan and Atwood 4-Corner Mechanical, Hydraulic and Electric jacks. It comes in either zinc plated or arctic white paint.

Click here to choose your swing bracket

This 4" extension plate should be used when the swing-a-way bracket doesn't give you enough clearance or if you have a cab-over camper where the "cab over" part comes down a little lower and doesn't allow the swing-a-way to fit properly (notice the notch out on the corner).

This Heavy Duty Wide 2 piece bracket comes with our sets of jacks and can be sold separately. It bolts together to make one wide corner bracket. It is 3.5" by 13" and comes in arctic white paint.

Shopping Cart PURCHASE BRACKETS::
Logo
Hi STrength Double Extended Bracket Hi STrength Double Extended Bracket Hi Strength Extended Bracket Standrad Corner
Angle Bracket for 2 piece 13 inch Heavy Duty Wide Corner Bracket
TFC-372A
Flat Bracket for 2 piece 13 inch HD Wide Corner Bracket
TFC-373A
2-Piece 13 inch Standard Narrow Bracket
90711
Angle Bracket for 2 piece 13 inch Standard Corner Bracket
TFC-370A

Angle Bracket for 2 piece 13 inch Heavy Duty Wide Corner Bracket. This Bracket is 13" in length and is angled to fit the wide flat plate bracket it measures 3" wide and has 2.5" wrap(Wrap is how much bracket covers the camper wall). Bracket for Four Corner Mechanical, Hydraulic, and Electric Jacks. Comes in Arctic White or Zinc.

Flat Bracket for 2 piece 13 inch HD Wide Corner Bracket. This Bracket is 13" in length and is flat and fits with part number TFC-372A it measures 3 3/4" wide and has a 3" wrap (or how much bracket covers the wall). Bracket for Four Corner Mechanical, Hydraulic, and Electric Jacks. Comes in Arctic White or Zinc.

This bracket is a 2 piece Standard Narrow bracket that measures 2.5" by 13" and Is sold with sets of jacks or can be purchased separately. Arctic White

Angle Bracket for 2 piece 13 inch Standard Corner Bracket. This Bracket is 13" in length and is angled to fit with part number 371A, it measures 1 1/5" wide and has a 1 1/4" wrap or (how much bracket covers the camper wall). Bracket for Four Corner Mechanical, Hydraulic, and Electric Jacks. Comes in Arctic White or Zinc.

Shopping Cart PURCHASE BRACKETS::
Logo
 Bracket  Bracket Extension 2 piece 13 inch HD Wide Bracket
Flat Plate for 2 piece 13 inch Standard Corner Bracket
TFC-371A
3" 2-Pc. Bracket
TFC-327A
TFC-327Z
6 Inch Lift / 2 Inch Extension Plates
TFC-364Z
TFC-364A
Arctic White 2" Four-Corner Extensions
TFC-362A

Flat Plate for 2 piece 13 inch Standard Corner Bracket. This Bracket is 13" in length and is flat and fits with part number TFC-370A, it measures 2 1/2" wide and has a 1 1/2" wrap (how much bracket covers the wall of the camper). Brackets for Four-Corner Mechanical, Hydraulic, and Electric Jack, Comes in Arctic White or Zinc.

This bracket is used mostly for stabilization of the rear jacks at the bottom and attaches to the lower part of the camper in the rear so the jacks are connected at there lowest point. Comes in either Arctic White or Zinc-Plated

These brackets bolt onto existing corner brackets. They give an additional 6 inches of lift and add 2 inches of clearance per side when corner brackets are facing out to the side of the camper. Used for wide fender and dual wheels or when a narrow camper is used on a tall full-sized truck. For use with Rieco-Titan and Atwood 4-Corner Mechanical Jacks and also Rieco-Titan Hydraulic jacks. Set of 4, 6" Lift/2" Extension Plates. Comes in either Arctic White and Zinc

These brackets bolt onto existing corner brackets. Adds 2 inch clearance per side when corner brackets are facing out to the side of the camper. Used for wide fender and dual wheels or when a narrow camper is used on a full size truck. For use with Rieco-Titan and Atwood 4-Corner Mechanical Jacks and Rieco-Titan Hydraulic Jacks.


©Copyright 2017 Rieco-Titan Products Incorporated. All Rights Reserved.
965 Lambrecht Road
Frankfort, Illinois 60423
Phone: Toll-Free(866)403.9803 Fax: (815)469.4705

Site Design by BakkerDesign